Single Facer (BSF)

● Diameter of Corrugating Roll 408mm. ● Blowing type for positive pressure by turbo blower. ● Corrugating roll with cartridge device for quick roll change within 15 minutes. ● Use AC inverter motor with timing belt to drive without gear box. ● Automatic glue gap control via setting by HMI. ● Hydraulic pressure control system. ● Optional tungsten carbide coated corrugating roll with spare cartridge device.

Mill Roll Stand (MS4)

● Working paper diameter : max. 1500mm, min. 330mm. ● Working paper width : 1600mm ~ 2500mm. ● Two pairs of swing arm can clamp and lift two paper rolls by hydraulic cylinder. ● Paper tension is manual adjusting pneumatic disk brake by pressure regulator. ● In case the pressure control of pneumatic brake links with auto splicer, paper tension will be automatic control.

Auto Splicer (SP100)

● Maximum splicing speed: 200 m/min for SP-90A. ● Maximum splicing speed: 300 m/min for SP-100. ● Automatic tension control for paper by PLC to obtain reliable splicing. ● Automatic splicing to new paper while existing paper comes off paper tube. ● Splicing width is 40 mm of adhesive tapes, cutting from edge to edge for zero tail. ● Cutting paper by serrated knife through pneumatic cylinder. ● Splice unit moves to right / left side for paper change and splicing.

Preheater (LPH / 2PH / 3LPH)

● Diameter of preheating drum: 750 mm for Preconditioner (2PH).900 mm for Preheater (LPH & 3LPH) ● Preheating drum with delicate finishing surface. ● Manual brake equips on the shaft-end of preheating drum for free rotation or fixation. ● Preheating drum equips one stationary web guide roll and one motorized web guide roll for preheating area adjustment.

Glue Unit (2GL)

● Motorized adjustment for web guider with preset digital counter on bottom control panel. ● Web guider can adjust for centering both upper webs to align with lower liner paper. ● Both decks of suction device used for web tension control, suction blower with inverter may adjust by manual potentiometer. ● Application roll driven by individual inverter motor. When the machine stops run, the application roll will be idle run to avoid glue conglutination.

Double Facer (CDB)

● Steam heating plate made by high grade cast iron, the surface through precision machinery grinding and hard chrome plated for high abrasive resistance. ● Hydraulic cylinder with stroke control for weight rolls lowering and lifting. The setting height for specified flute of single wall and double wall is selected by switch and micro adjustment by pushbutton with display to meet with the correspondent thickness of substance paper.

Slitter Scorer (QSD)

● Bottom slitter with single disc blade and grinding device. ● Three types of scorer can be selected. ● Knives and scorers adjusted by individual servo motor for positioning. ● Setting time for each order approximate 1 second in general operation. ● Slitting and scoring accuracy within ± 1mm . ● Unit transversal moving available ± 100mm. ● Tandem device for nonstop of order change. ● Industrial grade PC controls knives and scorers positioning and order change.

Cut Off Knife (SNCD)

● MODEL：SNCS (SINGLE UNIT). ● MODEL：SNCD (DOUBLE UNITS). ● Measuring roll. ● Knife cylinder. ● Out – feed conveyor. ● Twin servo motors drive ( power: 52.5 kW ). ● Sleeve cutter with independent double servo motors and drivers, even one set still work. ● Maximum working speed between 150-350 m/min depends on driven motor and cutting length of sheet. ● Cutting length: 500mm – 5000mm. ● Cutting accuracy: ± 1.0mm.

Auto Down Stacker (DDSK)

● MODEL: DSTK (SINGLE DECK). ● MODEL: DDSTK (DOUBLE DECKS). ● Six stages of belting conveyor driven by 5HP inverter motor driven. ● First stage with suction belt may hold rear end of sheet down avoiding next following sheet collision. ● Designed geometric angle for ending belt to delivery sheets regular stacking on roller conveyor platform. ● Roller conveyor platform lift & down by hydraulic cylinder. ● High performance up to 300 m/min for stacking sheet.

QS Series Fixed Type Servo Motor

● 1000mm x 2500mm / 1200mm x 2750mm. ● 660mm x 1800mm / 850mm x 2200mm.

N9 Mini Flexo Folder Gluer

● 660mm x 1800mm.

N5 Flexo Printer In-Line

● 1000mm x 2500mm.

6PA Top Printing

● 1200mm x 2750mm. ● 1200mm x 2500mm. ● 1200mm x 3000mm.

5PAB Bottom Printing

● 1000mm x 2500mm.

8PA Bottom Printing

● 1600mmx2200mm 1600mmx2600mm ● 1600mmx3000mm 1600mmx3600mm ● 1600mmx4000mm 1600mmx4200mm

6PAB Bottom Printing

● Machine Size： 1200mmx2500mm 1200mmx2750mm 1200mmx3000mm

11PAB Bottom Printing

● Machine Size： 2200mmx4100mm 2200mmx4800mm 2200mmx5200mm 2200mmx5500mm